Vacuum Toothpaste Mixer Toothpaste Production Equipment

Brief Des:

1. Siemens touch PLC operating system

2. Tanks material inner layer SS 316. Middle and out layer SS304

3. Motor brand: AAB OR Siemens

4. Heating method: steam heating or electrical heating

5. Power supply: three phase 220voltage 380voltage 460voltage 50HZ 60HZ for option

6. Leader time 30 days

7. System composition: Water phase pot, oil phase pot, emulsifying pot, vacuum pump, hydraulic system, electrical control system, working platform, stairs and other parts

8. The capacity from 100 litre up to 5000litre


Product Detail

Product Tags

Production Feature

section-title

◐ Toothpaste Production pot lid can adopt hydraulic lifting system, easy to clean and the cleaning effect is more obvious, the emulsifying pot can adopt tilt discharge;

◐ Toothpaste Production Equipment   used for produce the cream, lotion, paste, ointment, paste, conditioner, etc. Complex scraping board blending oar is suitable to every kind of complicated recipe and achieve optimizing effect;

◐ Polytetrafluroethylene of toothpaste lines  scraping board cater to body of blending groove and scrape out viscosity material on boiler wall;

◐ Homogenizer of Vacuum Toothpaste Mixer  is installed on boiler bottom to increase motor power more thoroughly and strongly. During few production, it can exert homogenizing effect fully;

◐ Mightiness balance isotactic curve rotor is matched with stator with corresponding structure to realize liquid high-capability cut,rubbing,centrifugal to make sure exquisite and slick cream;

Vacuum Toothpaste Mixer boiler body and pipe surface mirror polishing 300EMSH (sanitation grade) accords with Daily Chemical and GMP regulation;

◐ Customer can choose frequency conversion timing homogenizer and highest rotate speed is 4500 r/min;

◐ Toothpaste Mixing Machine  running  the materials are under the vacuum condition;

◐ toothpaste lines   makes use of the high shear emulsifier to distribute one or several to another continuous phase rapidly and evenly;

◐ The materials of toothpaste lines  will be processed in the narrow space between stator and rotor by strong energy of motion produced by the machine effect;

◐ Operation of Toothpaste Production   hydraulic shearing, centrifugal extruding, impacting, breaking and turbulence for over 199 thousand times per minute, the materials will be disperesed and emulsifed instantly and evenly,  After reciprocating circulation at high frequency, the fine finished products of stable and high quality without bubbles will be achieved;

◐ The product of Toothpaste Production Equipment mainly applied in such industries as daily chemical care products, biopharmacutical industry, food industry, paint and ink ,nanometer materials, petrochemical Industry, printing and dyeing auxiliaries, pulp & paper, pesticide, ferilizer, plastic & rubber, electronic and electronics, fine chemical industry, etc;

◐ Complex scraping board blending of Toothpaste Production  is suitable to every kind of complicated recipe and achieve optimizing effect;

◐ Polytetrafluroethylene scraping board cater to body of blending groove and scrape out viscosity material on boiler wall;

◐ Inline Homogenizer is installed on boiler bottom to increase motor power more thoroughly and strongly. During few production, it can exert homogenizing effect fully;

◐ Mightiness balance isotactic curve rotor of Toothpaste Production Line  is matched with stator with corresponding structure to realize liquid high -capability cut,rubbing,centrifugal to make sure exquisite and slick cream; boiler body and pipe surface of Toothpaste Production Line  mirror polishing 300EMSH (sanitation grade) accords with Daily Chemical and GMP regulation;

◐ Homogenizing vacuum emulsifier mixer can choose frequency conversion timing homogenizer and highest rotate speed is 4500 r/min;

Technical parameter

section-title
 Model  Capacity(L) Dispersing Motor No2  Scraper Stirring Motor Powder  Pot Motor  Limited Vacuum (Mpa)  Size (mm)L*W*H
Main pot Oil pot Water pot Powder pot KW RPM KW RPM KW RPM
100 100 50 80 100 3    

 

 

 

1440

 

 

1.5    

 

 

 

0-63

0.75    

 

 

 

1440

   

 

 

 

-0.095

2485*2600*200-2900
200 200 100 160 200 4 2.2 1.1 2750*3000*2400-3100
500 500 250 400 500 5.5 4 2.2 3500*3500**3900
1000 1000 500 800 1000 5.5 5.5 2.2 3700*4200*4600
2000 2000 1000 1600 2000 7.5 11 3 4300*4800*5400

Application Field

section-title

Toothpaste Production Line cosmetics, food, medicine, plastic resin, printing and dyeing, printing ink, asphalt and other industries have a wide range of applications.  

1, Fine chemicals: plastics, fillers, adhesives, resins, silicone oil, sealants, slurry, surfactants, carbon black, defoaming agent, brightener, leather additives, coagulants, etc.  

2, Petrochemical industry: heavy oil emulsification, diesel oil emulsification, lubricating oil, etc.  

3, Daily chemical industry: washing powder, concentrated washing powder, liquid detergent, all kinds of cosmetics, skin care products, etc. 

Option

section-title

1. power supply: three phase : 220v 380v .415v. 50HZ 60HZ

2. Capacity : 150litre up to 2000Litre

3. Motor brand : ABB. Siemens option

4. Heating method: Electric heating and steam heating option

5. control system plc touch screen. Key bottom

6. Fixed type or Hydraulic lifting type or Pneumatic lifting for more option

7. SIP is available upon request for cleaning process

8. Bidirectional mixing paddle with teflon scraper

9. Cooling system for mechanic seal inside the homogenizer for longer homogenizing time;

Smart zhitong has many professional designers, who can design Toothpaste Making Machine according to the actual needs of customers

Please contact us for free help @whatspp +8615800211936                    


  • Previous:
  • Next:

  • Write your message here and send it to us