Si toos ah u buuxinta iyo buuxinta mashiinka hawlgalka, dayactirka iyo hababka dayactirka

Mashiinka buuxinta tuubada tooska ah ee noocan oo kale ah ayaa awood u leh inuu maareeyo noocyada kala duwan ee viscous iyo semi-viscous alaabooyinka sida qurxinta, ... Saxnaanta buuxinta: ≦ ± 1 Cabbirka tuubada la hagaajin karo: 210mm (dhererka ugu badan)

Mashiinka Buuxinta iyo Xidhida Tooska ahnidaamka hawlgalka, dayactirka iyo dayactirka

Ujeeddo: In la dhiso hawlgalka mashiinka buuxinta iyo hababka dayactirka si loo habeeyo qalabka loona saxo hawlgalka

Hawlgalka iyo dayactirka iyo dayactirka si loo hubiyo daacadnimada iyo shaqada wanaagsan ee qalabka.

Baaxadda: Ku habboon hawl-wadeennada mishiinnada buuxinta aqoon-is-weydaarsiga, shaqaalaha dayactirka. Waajibaadka: Waaxda Qalabka, Waaxda Wax-soo-saarka.

nuxurka:

1. Hababka hawlgalka eeMashiinka Buuxinta iyo Xidhida Tooska ah

1.1. Hubi in dhammaan qaybaha Mashiinka Buuxinta Atoomatiga ah ay yihiin kuwo sax ah oo adag, in korantada korantadu ay tahay mid caadi ah, iyo in wareegga gaasku uu yahay mid caadi ah.

1.2 Hubi in silsiladda tuubada haysa, koob-haystaha, kamarada, beddelka iyo koodka midabkuba ay xaalad fiican ku sugan yihiin oo la isku halayn karo.

1.3. Hubi in isku xidhka iyo saliidaynta qayb kasta oo makaanik ahi ay xaalad fiican ku sugan yihiin.

1.4 Hubi in rugta rarka tuubada ee , rugta crimping tubbada, saldhiga laydhka, saldhiga buuxinta, iyo saldhiga dabadaIskudubbarid.

1.5 Nadiifi qalabka iyo walxaha kale ee ku wareegsan qalabka.

1.6 Hubi in dhammaan qaybaha unugga quudinta ay yihiin kuwo sugan oo adag.

1.7 Hubi in dareemaha xakamaynta ee Mashiinka Buuxinta Tooska ah uu ku jiro meeshii asalka ahayd, oo mishiinka ku rog shaagaga gacanta si aad u go'aamiso in ay jirto sababcaqabad.

1.8 Ka dib markii la xaqiijiyo in habka hore uu yahay mid caadi ah, shid korontada iyo hawo-mareenka, oo billow mashiinka hawlgalka tijaabada ah.

Ku orod xawaare sare, oo si tartiib tartiib ah u kordhi xawaaraha caadiga ah ka dib qalliinka caadiga ah.

1.9 Saldhigga tuubbada sare wuxuu hagaajiyaa xawaaraha matoorka tuubada sare si uu u dhigmo xawaaraha jiidiyaha usha koronto iyo xawaaraha mishiinka.

Tuubada tuurista tooska ah ha u socoto.

1.10 Saldhigga tuubada cadaadiska ayaa kaxeeya madaxa cadaadiska si uu isku mar u dhex maro dhaqdhaqaaqa kor iyo hoos ee habka isku xirka kamarada.

OK, ku cadaadi tuubada meesha saxda ah.

1.11. Adeegso shaagaga gacanta si aad u dhaqaajiso baabuurka una rogto booska iftiinka, u rog kamarada iftiinka si aad uga dhigto kamarad iftiin u dhow furaha, oo u ogolow iftiinka iftiinka ee beddelka sawir-qaadista inuu iftiimiyo bartamaha calaamadda midabka, masaafo dhan 5- 10 mm.

1.12. Goobta buuxinta eeMashiinka buuxinta Tooska ahwaa in marka tuubada kor loo qaado saldhigga iftiinka, tuubada ayaa kor u qaadaysa baaritaanka ka sarreeya cidhifka koontada

Calaamadda beddelka u dhowaanshaha ayaa sii mara PLC ka dibna iyada oo loo marayo valve solenoid si uu u shaqeeyo, isaga oo ka tagaya dhammaadka tuubada

Buuxinta iyo duritaanka koollada waxay ku dhammaatay 20MM.

1.13. Si loo hagaajiyo mugga buuxinta, marka hore dafi lowska, ka dibna u rog ulaha istaroogga oo u dhaqaaq booska isliilaha cududda istaroogga, kor u kaca, haddii kale gudaha hagaajiso, oo ugu dambeyntii xidh nuts.

1.14. Saldhigga daboolku wuxuu hagaajiyaa boosaska sare iyo hoose ee qalabka wax lagu dhejiyo iyadoo loo eegayo baahida tuubada, farqiga u dhexeeya mindiyaha wax lagu xiro waa qiyaastii 0.2MM.

1.15. Daar tamarta iyo isha hawada, billow nidaamka hawlgalka otomaatiga ah, iyo mashiinka buuxinta iyo shaabadeynta ayaa si toos ah u shaqeeya.

1.16 Buuxiyaha Tube-ka Tooska ah iyo Shaadheeyaha ayaa si adag uga mamnuuc hawl wadeennada aan dayactirin inay u hagaajiyaan cabbirrada dejinta si sabab la'aan ah. Haddi goobtu khalad tahay, unuggu waxa laga yaabaa in aanu si caadi ah u shaqayn, unugguna waxa laga yaabaa in uu waxyeelo gaadho xaalado daran. Haddii ay lagama maarmaan noqoto in la hagaajiyo inta lagu jiro habka codsiga, fadlan samee marka cutubku joojiyo socodsiinta.

1.17. Waa mamnuuc in la hagaajiyo unugga marka unugga uu socdo.

1.18. Xiritaanka Riix badhanka "Stop", ka dibna dami dareeska korantada iyo furaha isha hawada.

1.19. Si fiican u nadiifi qaybta quudinta iyo qaybta mashiinka buuxinta iyo xidhida.

1.20 Hayso diiwaanada heerka hawlgalka qalabka iyo dayactirka joogtada ah.

2. Tilmaamaha dayactirka:

2.1. Dhammaan qaybaha saliidda leh waa in lagu buuxiyaa saliid ku filan si looga hortago xirashada farsamada.

2.2. Inta lagu jiro hawlgalka, hawlwadeenku waa inuu u shaqeeyaa si caadi ah, loomana ogola inuu taabto qaybaha kala duwan ee qalabka inta uu shaqeynayo, si looga fogaado shilalka shakhsi ahaaneed. Haddii dhawaaq aan caadi ahayn la helo, waa in la xidho wakhtiga si loo hubiyo ilaa sababta la ogaanayo, mishiinkana mar kale ayaa shidmi karaa marka cilada meesha laga saaro.

2.3. Saliidaha waa in la saliidaa ka hor inta aan la bilaabin wax soo saarka (oo ay ku jiraan qaybta quudinta)

2.4. Ka daadi biyaha uruursan ee waalka yareeya cadaadiska (oo ay ku jiraan qaybta quudinta) ka dib marka la xiro ka dib wax soo saar kasta

2.5. Nadiifi gudaha iyo dibadda mashiinka buuxinta, waxaana si adag loo mamnuucay in lagu dhaqo biyo kulul oo ka sarreeya 45 ° C si looga fogaado waxyeello.

Qaybaha kala duwan inta lagu jiro hawlgalka si looga fogaado shilalka dhaawaca shakhsi ahaaneed. Haddii dhawaaq aan caadi ahayn la helo, waa in la xidho wakhtiga si loo hubiyo ilaa sababta la ogaanayo, mishiinkana mar kale ayaa shidmi karaa marka cilada meesha laga saaro.

2.3. Saliidaha waa in la saliidaa ka hor inta aan la bilaabin wax soo saarka (oo ay ku jiraan qaybta quudinta)

2.4. Ka daadi biyaha uruursan ee waalka yareeya cadaadiska (oo ay ku jiraan qaybta quudinta) ka dib marka la xiro ka dib wax soo saar kasta

2.5. Nadiifi gudaha iyo dibadda mashiinka buuxinta, waxaana si adag loo mamnuucay in lagu dhaqo biyo kulul oo ka sarreeya 45 ° C si looga fogaado waxyeello.giraanta xiridda.

2.6. Wax soo saar kasta ka dib, nadiifi mishiinka oo dami furaha korontada ama fur furka korontada.

2.7. Si joogto ah u hubi dareenka dareenka

2.8. Adkee dhammaan xiriirada

2.9. Hubi wareegga kontoroolka korantada iyo isku xirka dareemayaasha oo adkee iyaga.

2.10. Hubi oo tijaabi in mootada, nidaamka kulaylinta, PLC, iyo beddelaha soo noqnoqda ay caadi yihiin, oo samee tijaabada nadiifinta

Hubi in cabbirada isku-xidhka ahi ay yihiin xaaladda caadiga ah ee Buuxiyaha Tuubbada Tooska ah iyo Shaadhka

2.11. Hubi in hababka neef-mareenka iyo gudbinta ay xaaladdoodu wanaagsan tahay, oo samee hagaajin oo ku dar saliid saliid leh.

2.12. Qalabka dayactirka alaabta eeBuuxiyaha Tube-ka tooska ah iyo Shaadheeyahawaxaa gacanta ku haya hawlwadeenka, diiwaannada dayactirkana waa la hayaa.

ZT waxay leedahay waayo-aragnimo sannado badan oo xagga horumarinta ah, naqshadaynta Mashiinka Buuxinta iyo Buuxinta Tooska ah iyo Buuxinta Tuubbada Tooska ah iyo Baaliyaha Haddii aad wax walaac ah ka qabto fadlan la xiriir

Mareegta:https://www.cosmeticagitator.com/tubes-filling-machine/


Waqtiga boostada: Febraayo-06-2023