Toothpaste Tube Filling and Sealing Machine 300pcs/minute for Chinese client

11104021

toothpaste tube filling and sealing machine capable of handling 300 pieces per minute with a robotic system is a highly advanced and productive piece of equipment. Toothpaste Filling Machine utilizes robotics to automate the filling and sealing process, significantly increasing throughput and reducing the need for manual labor.
URS(USER REQUIREMENT SEPCIFICATIN)
Tube material: ABL    tube size in diameter : 25mm 28 mm
Toothpaste color: two colors  tube filling capacity 100gram
Filling accuracy : +-5g ,       filling capacity 300PCS/miunte
 
With a capacity of 200 tubes per minute, Toothpaste Tube Filling Machine is designed to handle large-scale production requirements efficiently. The robotic system of toothpaste packaging machine  precisely fills each tube with the desired amount of toothpaste, ensuring consistent quality and quantity. Once filled, the tubes are then automatically sealed, preventing contamination and leakage while extending product shelf life.

Main technical parameters

  NO    DATA   Remark
Tube in dia(mm) Diameter 11~50, length 80~250

Color mark positioning(mm) ±1.0

Filling  valume(ml)

5~200 (depending on the variety, process, specific specifications and sizes, each specification of mold can be equipped with a mold box)

Filling Process Accuracy(%) ≤±0.5

Sealing method Internal sealing imported hot air heating tail and Aluminum tube sealing

capacity(tube/minute) 250

Suitable tube Plastic pipe, aluminum. Aluminum-plastic composite pipe

Suitable material toothpaste

power(Kw) Plastic pipe, composite pipe 35

robot 10

Filling nozzle 4 sets (stations)

code Max 15 numbers

Power source 380V 50Hz Three  Phase + Neutral + Earthing

Air source 0.6Mpa

Gas consumption(m3/h) 120-160

Water Consumption(l/min) 16

Transmission chain type (Imported from Italy) Steel bar synchronous belt type (servo drive)

Transmission mechanism Full servo drive

Work surface closure Fully enclosed glass door

size L5320W3500H2200

Net weight(Kg) 4500

All parts of Tooth Paste Filling Machine in direct contact with the filling product are made of SUS316L stainless steel
Working Process Description for Tooth Paste Filling Machine
The Tooth Paste Filling Machine main motor is controlled by a servo motor, and the main transmission chain consists of 76 cup holders, synchronous belts and pulleys, guide rails and tensioning devices, etc., Tooth Paste Filling Machine is controlled by a servo motor, mainly used as the carrier of the tube. The tube of toothpaste packaging machine is fed into the system by the tube loading device. After being cleaned by the tube cleaning and detection device, it enters into the eye mark detection station of Toothpaste Filling Machine which controlled by four sets of servo motors. After the nozzles of Tooth Paste Filling Machine is rounded at the eye mark orientation station, it enters into the filling station of   The filling is controlled by four sets of servo motors. After filling, the unqualified tubes will be rejected (unqualified tubes will not be filled), and then enter into the sealing device. The sealing is controlled by servo motors of Toothpaste Tube Filling Machine . After the sealing is completed, The finished tubes is discharged from the discharge port controlled by the servo motor, and the tube that fails to be sealed will be rejected by the rejection device (reserved station, according to customer requirements)

 

 


Post time: May-11-2024