What precautions should be taken during the operation Tubes Filling Machine

What precautions should be taken during the operation Tubes Filling Machine 

1. Operators should carefully read the instructions of Tubes Filling Machine . Only professionals who have passed the training of the filling and sealing machine can operate the machine, and non-professionals are not allowed to operate the machine.

2. Do not dismantle or prohibit it at will, so as not to damage the machine and personnel.

3. Do not change the factory-set parameters unless necessary, so as to avoid unstable operation or malfunction of the Tubes Filling Machine. When the parameters must be changed, please make a record of the original parameters in order to restore the settings.

4. Please close all doors and windows during operation Tubes Filling Machine  to avoid personal injury caused by accidental contact.

5. During the debugging process, the observation window and door protection can be prohibited, Tubes Filling Machine  must be operated by professionals who are familiar with the machine's motion state.

6. Do not stop the machine, cut off the power supply, air source and water source when disassembling and assembling the parts; handle and put down the parts with care to avoid damage to the parts.

7. After disassembling and assembling the parts, it is necessary to jog the test run, and start the machine after the jog test is confirmed to be correct, so as to prevent the occurrence of accidents.

8. Before the hose is heated, plastic tube filler and sealer  is necessary to start the main engine and the cooling water according to the machine prompt, otherwise the hot air blown by the heater may melt the tube cup on the work plate and the cooling water pipe connected to the heater, causing damage; after the heating is turned off, send Delayed work of the air fan When the actual temperature of the heater drops below 60 degrees Celsius, the air supply fan stops working, and the cooling water continues to work. After the heater is fully cooled to 30 degrees Celsius, the power of the host and the cooling water can be turned off to avoid damage caused by waste heat. Mechanical damage.

9. When tapping the touch screen of plastic tube filler and sealer  with your hands, you need to be gentle. Do not use too much force or use hard objects instead of fingers to click to avoid damage to the touch screen.

10. The plexiglass observation window and plexiglass parts shall not be wiped with organic solvents or hard objects, so as not to damage the transparency.

11. The lens of the standard and tube inspection sensors should be wiped with a clean soft cloth to avoid damage.

12. Remember the operator password provided by the factory.

Smart zhitong is a comprehensive and plastic tube filler and sealer

 and equipment enterprise integrating design, production, sales, installation and service. It is committed to providing you with sincere and perfect pre-sales and after-sales services, benefiting the field of cosmetic equipment