Features of Tube Filling Machine
l. Tube Filling Machine has an original filling volume adjustment system, which can directly adjust the filling volume on the touch screen. The filling volume adjustment is convenient, accurate, stable and reliable.
2. Pneumatic buffer feeding tube, mechanical pressure tube into the cup, the feeding tube is stable and reliable.
3. Mechanical linkage visual inspection, accurate and stable.
4. Follow-up positive pressure cleaning pipe, the cleaning time is longer and the pipe is cleaner.
5. Plug-in follow-up filling, filling starts from the bottom of the tube, maximizing the removal of air in the tube and reducing product oxidation.
6. The inner wall of the three-layer hose is equipped with an instantaneous heater, the heating speed is fast, the outer wall of the tube is not damaged, and the sealing is stable and beautiful.
7. The document number can be printed on both sides, and the document number adopts a plug-in structure, which is easy to replace.
8. Quick-release filling system, smooth processing without dead ends, easy to clean.
9. Aluminum alloy frame, stainless steel countertop, in line with GMP standard, beautiful and generous
Nine precautions for the operation of the Tube Filling Machine
The Tube Filling Machine is an automatic filling machine, so it may encounter different problems at any time due to various negligence when using it.
1. Please clean up the surrounding environment before using the hose filling and sealing machine. In particular, sundries and dangerous objects that hinder the normal operation of the equipment cannot be placed next to the automation equipment.
2. The parts of the tube filling and sealing machine are finished by CNC lathe, and the parts match the size properly. Do not install or modify parts that are not suitable for the performance of the machine, otherwise accidents will occur.
3. The operators of the aluminium tube sealer have been specially trained, so the work clothes of the operators should be as neat as possible. Special attention: the sleeves of the overalls must be fastened and cannot be opened.
4. After adjusting all parts of the hose filling and sealing machine, turn the machine slowly to check whether the equipment is working normally, whether there is vibration or abnormal phenomenon.
5. The main transmission system of the machine is located at the bottom of the machine and is closed by a stainless steel door with a lock. When adjusting the loading capacity, it must be opened and adjusted by a special person (operator or maintenance technician). Before starting the machine again, make sure all doors are in good condition.
6. The hose filling and sealing machine is closed by the transparent plexiglass door above the desktop. When the machine starts normally, no one is allowed to open it without authorization.
7. In case of emergency, please press the red emergency stop button to troubleshoot in time. If a restart is required, be sure to confirm that the fault has been completely eliminated. Reset the emergency stop button and restart the host.
8. The hose filling and sealing machine should be operated by trained and qualified personnel in accordance with regulations. Do not allow other people to operate the machine at will, otherwise it will cause personal injury and machine damage.
9. Before each filling, carry out a 1-2 minute idling test to check the rotation of each part of the machine. The operation is stable, the operation is stable, there is no abnormal noise, the adjustment device works normally, and the instruments and meters work reliably.
Common Faults and Solutions for Tube Filling Machine
1. The loading capacity of the filling and sealing machine is unstable, what should I do with the quantity?
1. Check whether there is any leakage at the connection between the steel wire hose at the oil inlet of the equipment and the filling machine. If there are air bubbles here, use wire or wire clamps to tighten until there are no leaks.
2. Check whether there is dirt and particles in the copper check valve.
3. Check whether the magnetic switch on the cylinder is fixed, and be careful not to use too much force.
4. Replace the v-shaped sealing ring in the cylinder.
5. Most of the equipment uses a flow meter filling machine to detect the failure of the flow meter.
the
2. How does the filling mouth of the filling and sealing machine drip?
1. Adjust the screws at the four bottom corners of the filling machine to avoid shaking.
2. Check whether there are particles in the filling valve, and clean up if any.parts
3. How to adjust the filling speed of the edible filling and sealing machine?
1. Check whether the inlet pressure is normal. Otherwise, check whether the air circuit is blocked and whether the air compressor works normally.
2. Adjust the adjusting screw of the throttle valve of the solenoid valve muffler, withdraw quickly and screw in slowly.
3. The inlet pressure can be adjusted to 0.4~0.5mpa.
4. Check whether the filling valve is blocked by dirt, and if so, clean it.
Smart zhitong is a comprehensive and ointment Tube Filling Machine machines machinery and equipment enterprise integrating design, production, sales, installation and service. It is committed to providing you with sincere and perfect pre-sales and after-sales services, benefiting the field of cosmetic equipment
@carlos
Wechat &WhatsApp +86 158 00 211 936
Website:https://www.cosmeticagitator.com/tubes-filling-machine/
Post time: May-24-2023
