Precautions for use of Tube Filling Machine Plastic Tube Filler

Precautions for use of tube filling machine

1. Please clean the environment before using this machine. There must be no dangerous goods and other sundries around tube filling machine

2. Do not install or modify parts that are not suitable for the performance of the machine, otherwise accidents will occur.for tube filling machine

3. The operator's overalls should be as light as possible. Special Note: The sleeves of the overalls must be fastened and cannot be opened.

4. After adjusting each part for Tube Filling Machine  turn on the main key switch and turn the machine slowly to check whether the equipment is working normally and whether there is any vibration or abnormal phenomenon.

5. The main drive system of Plastic Tube Filler  is located at the bottom of the machine and is closed by a stainless steel door with a lock. When adjusting the load capacity, it must be opened and adjusted by specially assigned personnel. Make sure all doors are in good condition before restarting the Plastic Tube Filler

6. The Plastic Tube Filler  is closed by a transparent plexiglass door above the desktop. When the machine starts normally, no one is allowed to open the machine without authorization.

7. In case of emergency, please press the red emergency stop button to troubleshoot in time. If a restart is required, Plastic Tube Filler  must be confirmed that the fault has been completely resolved. Reset the emergency stop button, then restart the console.

8. The Soft Tube Filler should be operated by well-trained and qualified personnel. Do not let other people operate the machine at will, otherwise it will cause personal injury and machine damage.

9. Before each filling, do a 1-2 minute idle test to check the rotation of all parts of the machine. Stable operation, no abnormal noise. The adjustment device works normally, and all instruments and meters work reliably.

Smart zhitong is a comprehensive and Soft Tube Filler 

 and equipment enterprise integrating design, production, sales, installation and service. It is committed to providing you with sincere and perfect pre-sales and after-sales services, benefiting the field of cosmetic equipment