The Tube Fill Machine adopts full-closed and semi-closed filling through high-precision metering cylinders or servo motors to control the paste, liquid, and seal without leakage. The filling weight and capacity are uniform, and the filling, sealing, Printing is completed in one pass, and it is mainly used for product packaging in the fields of medicine, daily chemical products, food, and chemicals. Such as: 999 Piyanping, cream, hair dye, toothpaste, shoe polish, adhesive, AB glue, epoxy glue, neoprene and other materials filling and sealing. Tubes Filling Machine is an ideal, effective and economical filling equipment for medicine, daily chemical products, fine chemicals and other industries. It is necessary to ensure the integrity and good operation of the equipment during application, and regular maintenance of the filling and sealing machine is required. Since the filling and sealing machine is automatically controlled by electrical sensing, it is a highly automated equipment, and it must be Normal maintenance of the machine to ensure that the machine is under safe conditions to ensure the safety of the machine personnel and the high-quality production of machine products
Tube Fill Machine check points
1. Any lubricating parts should be filled with high-quality lubricants to avoid machine parts from being worn out
2. During the running process, the operator should standardize the operation and not allow to touch every part of the tube filling machine tool while it is running, so as to avoid personal safety accidents. If there is any abnormal sound, stop the machine immediately and check until the cause is found out, and then restart the operation after the problem is cleared.
3. The lubricator must be filled with oil (including feeding equipment) before each start of production
4. Release the accumulated water of the pressure reducing valve (including feeding equipment) after each production is shut down
5. Clean the inside and outside of the filling machine. It is forbidden to wash with hot water higher than 45°C to avoid damage to the sealing ring.
6. After each production is completed, clean the machine and turn off the power switch or unplug the power plug
7. Regularly check the sensitivity of the sensor
8. Tighten the connecting parts
9. Check the connection between the electric control circuit and each sensor system and tighten it
10. Check and test whether the motor, heating system, plc, and frequency converter are normal, and clean and test whether the coefficient parameters are normal.
11. Check whether the pneumatic and transmission mechanism is in good condition, and make adjustments and add lubricating oil
12. Equipment maintenance items are resolved by the operator and maintenance records are made
The machine must be well maintained in order to reduce the risk of damage in the application and cause losses to the company
Tube Fill Machine Purchase tips
1. First determine the tube filling macine you want to fill. Some manufacturers have many varieties of products. When purchasing a filling and sealing machine, they hope that one filling equipment can handle everything. In fact, the filling effect of the special-purpose machine is better than that of the compatible machine. The filling range is different, the model is different, the material structure is different, and the price is also different. If the products with a large gap in the filling range are filled by separate machines as much as possible.
2. Satisfy the conditions of high cost performance. At present, the quality of domestically produced filling and sealing machines has been improved a lot, and the quality of filling and sealing machines produced by some enterprises can be compared with that of advanced machines.
3. Choose a good filling machine company as much as possible. Choose models with mature technology and stable quality, with less energy consumption and low scrap rate. If the purchased machine often makes mistakes and wastes a lot of packaging film, its operating costs will also increase.
4. If there is an on-site inspection, it is necessary to pay attention to the major aspects and pay attention to the small details, which often determine the quality of the whole machine. Take sample test machine as much as possible.
5. In terms of after-sales service, the after-sales service is timely, and the length of after-sales warranty time is more advantageous. For example, if there is a problem in the food industry, if it cannot be solved immediately, it will not only affect the quality of the product, but also bring a large economic loss.
6. Oil filling and sealing machines trusted by peers can be given priority.
7. Buy as much as possible, simple operation and maintenance, complete accessories, fully automatic continuous feeding mechanism, which is more suitable for the long-term development of the enterprise
Smart zhitong is a comprehensive and Tube Fill Machine machinery and equipment enterprise integrating design, production, sales, installation and service. It is committed to providing you with sincere and perfect pre-sales and after-sales services, benefiting the field of cosmetic equipment
@carlos
Wechat WhatsApp +86 158 00 211 936
Website:https://www.cosmeticagitator.com/tubes-filling-machine/
Post time: Apr-25-2023
