Thetoothpaste filling machine is a paste filling machine designed according to the physical properties of toothpaste
List of common faults.
(1) The cylinder does not work:
1: Check whether the air compressor is turned on. This equipment is a pneumatic filling machine and requires a pneumatic pump.
2: Check whether the gas source switch and the power switch are turned on;
3: Check whether the air pressure meets the requirements, usually the air pressure is set to 04-0.6mpa;
4: Check whether the steering valve is installed correctly;
5: Check whether the fixed yellow switch is moved, and adjust it to the appropriate position;
(2) The filling volume is unstable:
1: Check the viscosity of the material and whether the sealing ring of each part is damaged, which can reduce the speed of material extraction and discharge, and replace the sealing ring;
2: Check whether there is enough material in the hopper, just fill the material.
Smart Zhitong has many years of experience in the development, design Toothpaste production machinery such as toothpaste filling machine If you have concerns please contact
@carlos
Wechat WhatsApp +86 158 00 211 936
Post time: Nov-25-2022
