The Tubes Filling Machine Guide For Everyone

Brief introduction for Tubes Filling Machine  

Tubes Filling Machine  belongs to a kind of plastic tube sealing equipment, which is flexible in operation, uses hot air heating system, optimizes the processing of binder, and satisfies the satisfactory filling requirements of different viscosities. The continuous improvement and perfection of the filling and sealing machine has improved its power, automation and accuracy, improved the filling level of the filling and sealing machine, and combined with other packaging equipment

Tubes Filling Machine  Application

The filling and sealing machine is suitable for filling and sealing large-diameter plastic tubes and composite tubes of various pasty, creamy, viscous fluids and other materials in industries such as medicine, food, cosmetics, and daily chemical products. 

Tubes Filling Machine  Application advantage

1. The whole machine structure of the hose filling and sealing machine is compact, and the use of closed upper tube equipment and transmission equipment can improve the safety of production.

Wholeness;

2. The active sealing equipment of the hose filling and sealing machine can obtain different shapes by adjusting the manipulator on the same machine.

Closing method;

3. Through the configuration of the programmable control system of the hose filling and sealing machine, it can automatically complete the tube supply, identification, filling, and folding.

The whole process of stacking, sealing, coding, and production. The equipment has high safety, stable operation, accurate operation positioning, and the material contact part of the equipment

The points are made of stainless steel materials, which can make the materials clean and will not stick to the equipment and affect the equipment.

On the one hand, it fits the world's 

Tubes Filling Machine operation method

1. Check whether the components are intact and stable, whether the power supply voltage is normal and whether the air circuit is normal.

2. Check whether the bush chain, cup holder, cam, switch and color code sensor are intact and secure.

3. Check whether the mechanical parts are connected correctly and lubricated.

4. Check whether the upper pipe station, pressure pipe station, dimming station, filling station and sealing station are coordinated.

5. Clean up tools and other objects around the equipment.

6. Check whether the part of the paper feeder group is intact and stable.

7. Check whether the control switch is in the original position, and then use the manual roulette machine to determine whether there is a problem.

8. After confirming that the previous process is normal, turn on the power supply and the air valve, and gently push the machine for trial operation, first run at low speed,

Then gradually increase to normal operating speed after normal.

9. The upper tube station adjusts the speed of the upper tube motor so that the speed of the electric pull rod matches the speed of the machine and keeps the automatic down tube running.

10. The pressure tube station drives the pressure head to run simultaneously through the up and down reciprocating motion of the cam linkage mechanism to press the hose to the correct position.

11. When arriving at the lighting position, please use the trolley to reach the lighting alignment station, rotate the lighting alignment cam to approach the switch towards the lighting cam, and make the light beam of the photoelectric switch illuminate the center of the color mark. The distance is 5-10 mm.

12. The gas station is when the hose is lifted in the lighting station, the probe proximity switch on the top of the pipe jacking cone will open the signal through the PLC, and then work through the solenoid valve. When the distance from the end of the hose is 20mm, the paste will complete the filling and discharge of the main body.

13. First loosen the nut to adjust the filling amount, and then increase outward when tightening the corresponding screw and moving the slider of the stroke arm. Otherwise, adjust inward and then lock the nut.

14. The tail sealing station can adjust the upper and lower positions of the tail sealing fixtures according to the requirements of the pipeline, and the gap between the tail sealing tools is about 0.2mm.

15. Turn on the power and air supply, start the automatic operating system, and then enter the automatic operation of the filling and sealing machine.

16. It is strictly forbidden for non-maintenance personnel to adjust various setting parameters at will. If the setting is not correct, the device may not work properly, and in severe cases may damage the device. If adjustment is required during application, it must be adjusted when the device is out of operation.

17. It is strictly forbidden to adjust the filling and sealing machine when the equipment is running.

18. Stop pressing the "Stop" button, and then turn off the power switch and air supply switch.

19. Clean the paper feeding device and the filling and sealing machine device.

20. Record the operation status and daily maintenance of the equipment。

Smart zhitong is a comprehensive and Tubes Filling Machine and equipment enterprise integrating design, production, sales, installation and service. It is committed to providing you with sincere and perfect pre-sales and after-sales services, benefiting the field of cosmetic equipment