Soft Tube Filling & Sealing Machine maintenance
1. Because thisSoft Tube Filler is an automatic machine, the sizes of the easy-to-pull bottles, bottle pads, and bottle caps are all required to be uniform.
2. Before driving Soft Tube Filling Machine first use the rocker handle to turn the machine to see if there is any abnormality in its rotation, and then drive after confirming that it is normal.
3. When adjusting the machine, the tools should be used properly. It is strictly forbidden to use too large tools or use too much force to disassemble parts so as not to damage the parts or affect the performance of the machine.
4. Whenever Soft Tube Filling and Sealing Machine is adjusted, be sure to tighten the loose screws, and turn the machine with the handle to check whether its action meets the requirements before driving.
5.Soft Tube Filling & Sealing Machine must be kept clean. It is strictly forbidden to have oil, liquid medicine or glass debris on the machine, so as to avoid damage to the machine. Therefore, it is recommended:
(1) During the production process of Soft Tube Filling and Sealing Machine , remove the liquid medicine or glass debris in time.
(2) Before the shift, each part of the machine surface should be cleaned once, and clean lubricating oil should be added to each activity department.
(3) It should be scrubbed once a week, especially the places that are not easy to clean in normal use or blown with compressed air. Filling machine disinfection and flushing
5.Loosen the upper and lower set screws, remove the injection system for overall disinfection, or disassemble it for disinfection and cleaning separately,
6. Put the liquid inlet pipe in the cleaning solution and start cleaning.
7.Soft Tube Filling Machine may be errors in the actual filling of the 500ml model, so use a graduated cylinder to measure it before the formal filling.
Smart Zhitong has many years of experience in the development, design Soft Tube Filler such as Soft Tube Filling and Sealing Machine and Soft Tube Filling Machine
If you have concerns please contact
Post time: Nov-23-2022
