Precautions for installation of ointment tube filling machine

      1. After unpacking Ointment Tube Filler , first check whether the random technical information is complete, and whether  Tube Filler is damaged during transportation, so as to solve it in time.

   2. Install and adjust the feeding and discharging components according to the outline diagram in this manual.

    3. Apply new lubricating oil to each lubricating point of Aluminum Tube Filler

   4. Turn the machine with the rocker handle to check whether the machine is running in the correct direction (counterclockwise when facing the motor shaft), and the machine must be protected and grounded.

    5. If Aluminum Tube Filler is not used for a long time, the material in the pipeline should be emptied.

   6. Do a good job of cleaning and sanitation, keep the surface of the Aluminum Tube Filler  clean, often remove the accumulated material on the scale body, and pay attention to keeping the inside of the electric control cabinet clean.

7. The sensor is a high-precision, high-sealed, and high-sensitivity device. It is strictly forbidden to impact and overload. It must not be touched during operation.

Operation process of ointment tube filling machine

1. Check before using aluminum tube filling machine : After the hose filling and sealing machine is installed, connect the 380V three phase power supply , test run the motor, ensure the correct direction of operation, and ensure the pressure and flow of compressed air (0.5-0.6m3 /min), check whether the motors, bearings, etc. need to be lubricated, it is strictly forbidden to run without oil, start the machine after it is normal, and observe whether the fasteners of each part are loose. .

2. Check whether the safety device of the aluminum tube filling machine  is functioning normally.

3. Before opening the aluminum tube filling machine carefully check whether the chain plate is stuck, whether there is debris on the conveyor belt, whether there is a hose in the storage box, whether the power supply and air source are connected, and all conditions are ready. Finally, start the main power supply again, the power indicator light is on, and the emergency stop indicator light is not on, then the starting conditions are met. Press the start button on the control box and the start switch at the filling place, and turn off the main power supply after stopping.

Eight safety rules for the use of ointment filling machine 

1. There are no foreign objects in the filling machine equipment (such as tools, rags, etc.);

2. The filling machine is not allowed to have abnormal noise, if there is any abnormal noise, it should be stopped immediately to check the reason;

3. All protective objects should be safe and reliable, and it is strictly forbidden to wear clothing that may be caught by moving parts (such as scarves, bracelets, watches, etc.);

4. Those with long hair should wear a hair cover;

5. Do not clean the electrical unit with water or other liquids;

6. Wear work clothes, gloves, glasses, etc. when cleaning to prevent strong acid and strong alkali corrosion;

7. When the machine is running, someone must monitor it, and do not approach the machine with tools or other objects;

8. The hose filling and sealing machine needs to be operated by a special person. Do not allow personnel who have nothing to do with the operation to approach the equipment.

Precautions for installation of ointment filling machine

1. After unpacking the hose filling and sealing machine, first check the random supporting tools and electrical instruction manual, whether the vulnerable parts are complete, and whether the machine is damaged during transportation, so as to solve it in time.

2. Install and adjust the feeding and discharging components according to the outline diagram in this manual.

3. In the technical manual of the aluminum  tube filling machine, there is a guide to add lubricating oil, and add new lubricating oil to each lubricating point.

4. The aluminum  tube filling machine  needs to be turned with a rocker handle to check whether the machine is running in the correct direction (counterclockwise when facing the motor shaft), and the machine must be protected and grounded.

Smart zhitong is a comprehensive and aluminum  tube filling machine and equipment enterprise integrating design, production, sales, installation and service. It is committed to providing you with sincere and perfect pre-sales and after-sales services, benefiting the field of cosmetic equipment