Automatic Tube Filler and Sealer define and procedure

Automatic tube filler and sealer is a machine used to fill various types of tubes, including plastic, laminated, and aluminum, with various products such as cosmetics, food, pharmaceuticals, and chemicals. The machine operates automatically, filling and sealing tubes in a continuous process, reducing the time and labor required for manual tube filling and sealing. The device can handle high volumes of tubes and products, ensuring efficient production and consistency in filling and sealing quality.

Automatic Tube Filler and Sealer can smoothly and accurately filling various pasty, creamy, viscous fluids and other materials into the tube, and complete the hot air heating in the tube, sealing, batch number, production date, etc

It is suitable for filling and sealing large-diameter plastic pipes and composite pipes in industries such as medicine, food, cosmetics, and daily chemical products.

The filling and sealing machine adopts closed and semi-closed filling paste and liquid. There is no leakage in the sealing, and the filling weight and capacity are consistent. Filling, sealing and printing are completed at one time.

Automatic Filling and Sealing Machine introduce

 Automatic Tube Filler and Sealer  is a comprehensive automatic  packaging equipment for filling in cosmetics, food, chemical and other industries. It is widely used. Then, the operation procedure of   Automatic Tube Filler and Sealer is described as follows: Check whether each component is intact and stable, whether the power supply voltage is normal, and whether the gas circuit is normal. Check whether the sleeve chain, cup holder, cam, switch and color code sensor are intact and firm.

Check whether Automatic Tube Filler and Sealer the mechanical parts are properly connected and lubricated, and check whether the upper pipe station, pressure pipe station, dimming station, filling station, and sealing station are coordinated. Clean tools and other objects around the equipment. Check whether all parts of the feeder group are intact and firm. Check that the control switch is in the original position, then use a hand roulette to determine if there is a problem. 

After confirming that the previous process is normal, turn on the power  of Automatic Tube Filler and Sealer supply and air valve, and gently push the machine for trial operation, first run at low speed, and then gradually increase to normal speed after normal operation. The pipe feeding station adjusts the speed of the pipe feeding motor so that the speed of the electric pull rod matches the speed of the machine and keeps the automatic downcomer running. The pressure tube station drives the pressure head to run simultaneously through the up and down reciprocating motion of the cam linkage mechanism to press the hose to the correct position.

Automatic Filling and Sealing Machine setup process

 When reaching the lighting position, please use the trolley to reach the lighting alignment station of    Automatic Filling and Sealing Machine , rotate the lighting alignment cam to work towards the lighting cam proximity switch, and make the light beam of the photoelectric switch illuminate the center of the color mark. The distance is 5-10mm. When the gas station lifts the tube in the lighting station, the probe proximity switch on the top of the pipe jacking cone will open the signal through the PLC, and then work through the solenoid valve. 

When the distance from the end of the hose is 20mm, the paste will complete the filling and discharge of the main body. First loosen the nut to adjust the filling amount, and then increase outward when tightening the corresponding screw and moving the travel arm slider. Otherwise, adjust inwards and lock the nuts at the back. The sealing station can adjust the upper and lower positions of the sealing fixtures according to the pipeline requirements, and the gap between the sealing fixtures is about 0.2mm.

Turn on the power and air source of    Automatic Filling and Sealing Machine , start the automatic operating system, and then enter the automatic operation of the filling and sealing machine. It is strictly forbidden for non-maintenance personnel to adjust all setting parameters arbitrarily. If the settings are incorrect, the device may not function properly and in severe cases may be damaged. If adjustments are required during use, they must be adjusted when the equipment is out of operation.

It is strictly forbidden to adjust Automatic Filling and Sealing Machine  when the equipment is running. Stop pressing the "Stop" button, then turn off the power switch and the gas supply switch. Clean the paper feed unit and fill-seal unit. Record the operating status and daily maintenance of the    Automatic Filling and Sealing Machine . The article comes from the Internet, if there is any infringement or violation, please contact us for deletion 

Smart zhitong is a comprehensive and  Automatic Tube Filler and Sealer  machinery and equipment enterprise integrating design, production, sales, installation and service. It is committed to providing you with sincere and perfect pre-sales and after-sales services, benefiting the field of cosmetic equipment

@carlos

Wechat &WhatsApp +86 158 00 211 936

Website:https://www.cosmeticagitator.com/tubes-filling-machine/