ointment tube filling machine is an automatic filling machine, so you may encounter different problems at any time due to various negligence when using it. will talk about the nine precautions for the operation of the ointment filling and sealing machine
1. Please clean up the surrounding environment before running ointment filling and sealing machine In particular, sundries and dangerous objects that hinder the normal operation of the equipment cannot be placed next to the automation equipment.
2. The parts of ointment filling and sealing machine are finished by CNC machine, and the parts match the size properly. Do not install or modify parts that are not suitable for the performance of the machine, otherwise accidents will occur.
3. The operators of ointment tube filling and sealing machine have been specially trained, so the work clothes of the operators should be as neat as possible. Special attention: the sleeves of the overalls must be fastened and cannot be opened.
4. After adjusting all parts of aluminum tube filling machine, turn the machine slowly to check whether the equipment is working normally, whether there is vibration or abnormal phenomenon.
5. The main transmission system of ointment tube filling and sealing machine is located at the bottom of the machine and is closed by a stainless steel door with a lock. When adjusting the loading capacity, it must be opened and adjusted by a special person (operator or maintenance technician). Before starting the machine again, make sure all doors are in good condition.
6. Ointment tube filling machine is closed by the transparent plexiglass door above the desktop. When the machine starts normally, no one is allowed to open it without authorization.
7. In case of emergency, please press the red emergency stop button to troubleshoot in time. If a restart is required, be sure to confirm that the fault has been completely eliminated. Reset the emergency stop button and restart the host.
8. The aluminum tube filling machine should be operated by trained and qualified personnel in accordance with regulations. Do not allow other people to operate the machine at will, otherwise it will cause personal injury and machine damage.
9. Before each filling, carry out a 1-2 minute idling test to check the rotation of each part of the machine. The operation is stable, the operation is stable, there is no abnormal noise, the adjustment device works normally, and the instruments and meters work reliably.
Smart Zhitong has many years of experience in the development, design aluminium tube filling machine
If you have concerns please contact
@carlos
Wechat WhatsApp +86 158 00 211 936
For more type of aluminum tube filling machine please visit
Post time: Dec-12-2022
