Principle and application of ointment packaging machine

ointment packaging machine  can smoothly and accurately inject various pasty, creamy, viscous fluids and other materials into the hose, and complete the hot air heating in the tube, sealing, batch number, production date, etc. It is suitable for filling and sealing large-diameter plastic pipes and composite pipes in industries such as medicine, food, cosmetics, and daily chemical products.

 ointment packaging machine adopts closed and semi-closed filling paste and liquid. There is no leakage in the sealing, and the filling weight and capacity are consistent. Filling, sealing and printing are completed at one time. Aluminium Tube Filler Sealer is suitable for medicine, daily chemical, food, Product packaging in chemical and other fields. Such as: filling and sealing of piyanping, ointment, hair dye, toothpaste, shoe polish, adhesive, AB glue, epoxy glue, neoprene and other materials. It is an ideal, practical and economical filling equipment for pharmaceutical, daily chemical, fine chemical and other industries

ointment packaging machine  operation

1. Check whether all parts are in good condition, whether the power supply voltage is normal, and whether the air circuit is normal.

2. Check whether the socket chain, cup holder, cam, switch, color code and other sensors are intact and reliable.

3. Check that all mechanical parts of ointment packaging machine are well connected and lubricated.

4. Check whether the upper tube station, crimping tube station, dimming station, filling station and sealing station are coordinated.

5. Clean tools and other items from around the equipment.

6. Check that all parts of the feeder assembly are sound and secure.

7. Check that the control switch is in the original position and use a manual roulette to determine if there is a problem.

8. After confirming that the previous process is normal, turn on the power and the air valve, push the machine slightly for a trial run, first run at low speed, and then gradually increase to normal speed after normal.

9. The pipe-loading station adjusts the speed of the pipe-loading motor to match the speed of the electric pull rod with the speed of the machine, and maintains automatic pipe-dropping operation.

10. The tube pressing station drives the pressure head to run at the same time through the up and down reciprocating movement of the cam linkage mechanism to press the hose to the correct position

11. Go to the light position, use a trolley to reach the light alignment station, rotate the light alignment cam to make it work towards the light cam proximity switch, and make the light beam of the photoelectric switch irradiate a distance of 5-10 mm from the center of the color code. 

12. The filling station of ointment packaging machine  is, when the hose is lifted at the lighting station, the probe pipe proximity switch on the top of the cone end of the jacking pipe will open the signal through the PLC, and then work through the solenoid valve, when the end of the hose is 20 mm away, the paste The filling and discharge of the body will be completed.

13. Adjust the fill level first by loosening the nut, then increase outwards while tightening the corresponding screw and moving the slider of the travel arm. Otherwise, adjust inwards and lock the nuts.

14. The tail sealing station adjusts the upper and lower positions of the tail sealing knife holder according to the requirements of the pipeline, and the gap between the tail sealing knives is about 0.2mm.

15. Turn on the power and air supply, start the automatic operating system, and enter the automatic operation of the automatic filling and sealing machine.

16. Non-maintenance operators are strictly prohibited from arbitrarily adjusting various setting parameters. If the settings are incorrect, the device may not function properly and in severe cases may be damaged. If adjustments are required during application, they must be made while the equipment is out of service.

17. It is strictly forbidden to adjust the unit when the unit is running.

18. Stop pressing the "Stop" button, and then turn off the power switch and air supply switch.

19. Complete cleaning of the feeding device and the filling and sealing machine device.

20. Record ointment packaging machine operation status and daily maintenance 

Smart zhitong is a comprehensive and ointment packaging machine and equipment enterprise integrating design, production, sales, installation and service. It is committed to providing you with sincere and perfect pre-sales and after-sales services, benefiting the field of cosmetic equipment

@carlos

Wechat &WhatsApp +86 158 00 211 936

Website:https://www.cosmeticagitator.com/tubes-filling-machine/