ointment filling and sealing machine is made of special profiles, and the tube is controlled manually. The machine is equipped with 12 stations for automatic rotation, quantitative filling, automatic tail sealing, and finished product exit. All work is controlled by the full stroke of the cylinder, and the filling volume is adjusted electrically. This machine is suitable for filling, sealing, date printing and cutting of aluminum tubes of various specifications. This machine has beautiful and tidy appearance, firm sealing, high measurement accuracy and good stability. Optional according to different materials: hopper heating system, anti-drawing filling head. It is suitable for automatic filling, sealing, cutting and date printing of various composite hoses. It is widely used in daily chemical, pharmaceutical, food, chemical and other industries.
1. ointment filling and sealing machine has a compact structure, automatic tube loading, and the transmission part is fully enclosed;
2. The fully automatic operating system of this function completes the whole process of supplying tubes, washing tubes, marking, filling, hot-melting, sealing, coding, trimming, and finished products;
3. Pipe supply and pipe washing are completed by pneumatic means, and the action is accurate and reliable;
4. The rotary hose mold is equipped with an electric eye control hose center positioning device, which uses photoelectric induction to complete automatic positioning;
5. It is easy to adjust and disassemble, especially suitable for users who produce multi-specification and large-diameter hoses, and the adjustment is convenient and quick;
6. Intelligent temperature control and cooling system make the operation simple and reliable;
7. The material contact part is made of 304 stainless steel, which is clean, hygienic and fully complies with the requirements of GMP regulations;
8. Machine speed can be controlled and adjusted by inverter;
9. The height adjustment is direct and convenient.
10. The filling volume of the hose can be adjusted by adjusting the handwheel, which is convenient and quick.
11. Equipped with safety devices, open the door to stop, no filling without tube, overload protection.
12. The transmission part is enclosed below the platform, which is safe, reliable and pollution-free.
13. The filling and sealing part is installed in the semi-closed non-static outer frame visible cover above the platform, which is easy to observe, operate and maintain.
14. Stainless steel tact switch operation panel.
15. Inclined-hanging and straight-hanging tube warehouses are optional.
16. The arc-shaped handrail is equipped with a vacuum adsorption device. After the handrail interacts with the tube pressing device, the hose is fed into the upper tube workstation.
17. The photoelectric benchmarking workstation uses high-precision probes, stepping motors, etc. to control the hose pattern to be in the correct position.
18. When the injection is finished, the air blowing device blows off the paste tail.
19. The sealing temperature adopts (Leister heat gun) internal heating at the end of the tube, and the external cooling device is equipped.
20. The code typing workstation automatically prints the code at the position required by the process.
21. The plastic manipulator cuts the tail of the hose into a right angle or a rounded corner for selection.
22. Fail-safe alarm, overload shutdown.
23. Counting and quantitative shutdown.
Precautions for ointment filling and sealing machine
1. All lubricating parts should be filled with sufficient lubricant to prevent mechanical wear.
2. During the running process, the operator should operate in a standardized manner, and is not allowed to touch the various parts of the machine tool while it is running, so as to avoid causing
Personal injury accidents. If any abnormal sound is found, it should be shut down in time to check until the cause is found out, and the machine can be turned on again after the fault is eliminated.
3. The lubricator must be filled with oil (including the feeding unit) before starting production each time.
4. Drain the stagnant water of the pressure reducing valve (including the feeding unit) after shutdown at the end of each production.
5. Clean the inside and outside of the filling machine. It is strictly forbidden to wash with hot water higher than 45°C, so as not to damage the sealing ring.
6. After each production, clean the machine and turn off the main power switch or unplug the power plug.
7. Regularly check the sensor sensitivity.
8. Tighten the connecting parts.
9. Check and tighten the connection between the electric control circuit and each sensor.
10. Check and test whether the motor, heating system, PLC, and frequency converter are normal, and perform a cleaning test to see if the parameters of each coefficient are normal.
11. Check whether the pneumatic and transmission mechanism are in good condition, and make adjustments and add lubricating oil
Smart Zhitong has many years of experience in the development, design ointment filling and sealing machine
Please visit website for more details: https://www.cosmeticagitator.com/tubes-filling-machine/
If you have concerns please contact
Post time: Jan-12-2023
