Matters needing attention in the operation of Tooth Paste filler

              Filling Machine Tooth Paste Filling Machine This equipment adopts touch screen and PLC control, automatic tube loading, automatic positioning, and a hot air heating system composed of imported fast heater and high stability flowmeter,
Tooth Paste Filling Machine has strong sealing, fast speed, and will not damage the appearance of the sealing part. The sealing tail is beautiful and tidy. You can choose filling heads of various specifications to meet the filling requirements of different viscosities.
And equipped with a plexiglass dust cover, the semi-enclosed anti-static frame visible cover at the filling and sealing tail is easy to observe, operate and maintain.

Tooth Paste filler table list 

Model no	Nf-40	NF-60	NF-80	NF-120	NF-150	LFC4002
Tube material	Plastic aluminum tubes .composite ABL laminate tubes
Station no	9	9	12	36	42	118
Tube diameter	φ13-φ50 mm
Tube length(mm)	50-210  adjustable
viscous products	Viscosity less than 100000cpcream gel ointment toothpaste paste food sauce and pharmaceutical, daily chemical, fine chemical
capacity(mm)	5-210ml adjustable
Filling volume(optional)	A:6-60ml, B:10-120ml, C:25-250ml, D:50-500ml (Customer made available)
Filling accuracy	≤±1％					≤±0.5％
tubes per minute	20-25	30	40-75	80-100	120-150	200-28P
Hopper Volume:	30litre	40litre	45litre	50 litre		70 litre
air supply	0.55-0.65Mpa 30 m3/min			40m3/min		550m3/min
motor power	2Kw(380V/220V 50Hz)		3kw	5kw		10KW
heating power	3Kw			6kw		12KW
size(mm)	1200×800×1200mm	2620×1020×1980	2720×1020×1980	3020×110×1980		3220×140×2200
weight (kg)	600	1000	1300	1800		4000

Matters needing attention in the operation of tube filling and sealing machine

1. The Tooth Paste Filling Machine cleans the sundries in the hopper, adds materials, and then puts the hopper packaging cover in place

2. When operating the Tooth Paste Filling Machine, please do not touch the operating parts with your hands to avoid accidents. Be sure to lock the nut after adjusting the measurement. If there is any abnormal response during the operation of the Tooth Paste Filling Machine, the machine will not start until the cause is found.

When filling large-capacity containers, the diameter of the filling nozzle should not be too small to prevent excessive pressure during filling from causing rubber spray or nozzle damage.

3. Do not dismantle or prohibit various protective measures at will, so as not to damage the machine and personnel.

4. Do not change the factory setting parameters of Toothpaste Tube Filling Machine when it is not necessary to avoid unstable operation or failure of the machine. When the parameters must be changed, please record the original parameters to restore the settings.

5. During the debugging process of Toothpaste Tube Filling Machine it must be operated by professionals who are familiar with the machine's motion state.

6. When disassembling and assembling Toothpaste Tube Filling Machine parts, you must stop and cut off the power supply, air source and water source; when disassembling and assembling parts, you should handle them with care so as not to damage the machine parts.

7. After dismantling and dismantling the machine parts, it is necessary to test the driver by micro-motion. After confirming that the jog test is correct, the machine can be turned on to avoid injury.

8. Before heating the toothpaste  tubes, Toothpaste Tube Filling Machine machine must first start the host machinery  and cooling water according to the prompts of several devices avoide overheating for sealing compoments , otherwise the hot air blown by the heater may make the tube cup seats  on the working board and the tube connected to it Cooling pipes melted.
Heater, causing damage; after the heating is turned off, the heating blower fan will delay working, when the actual temperature of the heater drops below 60°C, the blower will stop working, and the cooling water will continue to work for cooling heated compoments,
After the heater is completely cooled to 30°C, you can turn off the main engine power of machine and cooling water to avoid waste heat damaged parts.

9. When touching the touch screen of Toothpaste Tube Filling Machine with your hands, please do not use too much force or hit it with hard objects instead of fingers, so as not to damage the touch screen.

10. Toothpaste Tube Filling and Sealing Machine adopts touch screen and PLC control, automatic tube loading, automatic positioning, and a hot air heating system composed of imported fast heater and high stability flowmeter,

Toothpaste Tube Filling and Sealing Machine has strong sealing performance, fast speed, and will not damage the appearance of the sealing part, and the sealing tail is beautiful and tidy.

11. Filling heads of various specifications can be selected to meet the filling requirements of different viscosities, and are Toothpaste Tube Filling and Sealing Machine equipped with plexiglass dust covers. The semi-enclosed anti-static outer frame visible cover at the filling and sealing tail is easy to observe, operate and maintain.

 

Smart zhitong is a comprehensive and Tooth Paste Filling Machine
and equipment enterprise integrating design, production, sales, installation and service. It is committed to providing you with sincere and perfect pre-sales and after-sales services, benefiting the field of cosmetic equipment