Little-Known Facts About Ointment Filling Machine

          Ointment tube filling machine is a highly automated machine. At the same time, the machine has many mechanical actions to complete filling, sealing and other actions under the control of PLC program. Therefore, the machine has many protection functions (electrical, mechanical, program function design)

Ointment tube filling and sealing machine has many protection functions when it is designed. Various protection devices must not be disassembled or used at will to avoid damage to the machine and personnel.

Ointment tube filling machine, do not change the factory set parameters unless necessary to avoid machine instability or failure. When the parameters must be changed, please make a record of the original parameters to restore the settings.

When the Ointment Tube Filler is running, do not put your hands and body parts into the working part of the machine at will to avoid personal injury caused by accidental contact.

Ointment tube filling machine list

Model no	Nf-40	NF-60	NF-80	NF-120	NF-150	LFC4002
Tube material	Plastic aluminum tubes .composite ABL laminate tubes
Station no	9	9	12	36	42	118
Tube diameter	φ13-φ50 mm
Tube length(mm)	50-210  adjustable
viscous products	Viscosity less than 100000cpcream gel ointment  and pharmaceutical, daily chemical, fine chemical
capacity(mm)	5-210ml adjustable
Filling volume(optional)	A:6-60ml, B:10-120ml, C:25-250ml, D:50-500ml (Customer made available)
Filling accuracy	≤±1％					≤±0.5％
tubes per minute	20-25	30	40-75	80-100	120-150	200-28P
Hopper Volume:	30litre	40litre	45litre	50 litre		70 litre
air supply	0.55-0.65Mpa 30 m3/min			40m3/min		550m3/min
motor power	2Kw(380V/220V 50Hz)		3kw	5kw		10KW
heating power	3Kw			6kw		12KW
size(mm)	1200×800×1200mm	2620×1020×1980	2720×1020×1980	3020×110×1980		3220×140×2200
weight (kg)	600	1000	1300	1800		4000

During the debugging process of Ointment Tube Filler, it should be operated by professionals who are familiar with the movement status of the machine, and read the Tube Filler manual carefully.

When disassembling and assembling machine parts of the ointment filling and sealing machine, do not stop the machine, cut off the power supply, air source, and water source; when transporting and handling the disassembled parts, they should be handled with care to avoid damage to the machine parts.

After disassembling and assembling the parts of the ointment filling and sealing machine, a jog test run is required. The machine can be turned on only after confirming that the jog test is correct to prevent accidents.

When tapping the touch screen of the ointment filling and sealing machine by hand, it is necessary to be gentle. Do not use excessive force or use hard objects instead of fingers to tap, so as not to damage the touch screen.

If the ointment tube filling machine has plexiglass observation windows and plexiglass parts, do not wipe them with organic solvents or hard objects to avoid destroying the transparency.

The inspection mark and inspection sensor lens of the ointment tube filling machine should be wiped with a clean soft cloth to avoid damage.

Remember the operator password provided by the manufacturer during the operation of the ointment tube filling machine