How to maintain the filling and sealing machine? A particularly good topic, the specific steps are as follows
Maintenance steps for automatic filling sealing machine
1. Before going to work every day, observe the moisture filter and oil mist device of the two-piece pneumatic combination. If there is too much water, it should be removed in time, and if the oil level is not enough, it should be refueled in time;
2. In the production, it is necessary to inspect and observe the mechanical parts frequently to see whether the rotation and lifting are normal, whether there is any abnormality, and whether the screws are loose;
3. Frequently check the ground wire of the equipment, and the contact requirements are reliable; clean the weighing platform frequently; check whether there is any air leakage in the pneumatic pipeline and whether the air pipe is broken.
4. Replace the lubricating oil (grease) for the motor of the reducer every year, check the tightness of the chain, and adjust the tension in time.
automatic filling sealing machine idle check items
5. If it is not used for a long time, the material in the pipeline should be emptied.
6. Do a good job in cleaning and sanitation, keep the surface of the machine clean, frequently remove the accumulated material on the scale body, and pay attention to keeping the inside of the electric control cabinet clean.
7. The sensor is a high-precision, high-sealed, and high-sensitivity device. It is strictly forbidden to impact and overload. It must not be touched during work. It is not allowed to disassemble unless it is necessary for maintenance.
8. Check the pneumatic components such as cylinders, solenoid valves, speed control valves and electrical parts every month. The inspection method can be checked by manual adjustment to check whether it is good or bad and the reliability of the action. The cylinder mainly checks whether there is air leakage and stagnation. The solenoid valve can be forced to operate manually to judge whether the solenoid coil is burned or the valve is blocked. The electrical part may pass the input and output signals. Check the indicator light, such as checking whether the switch element is damaged, whether the line is broken, and whether the output elements are working normally.
9. Whether the motor has abnormal noise, vibration or overheating during normal operation. The installation environment, whether the cooling system is correct, etc., need to be carefully checked.
10. Carry out daily operations in accordance with the regulations of the Code of Operations. Each machine has its own attributes. We must follow the principle of standard operation and "see more, check more", so as to prolong the service life of the machine.
Post time: Mar-09-2023
