Maintenance items of cosmetic tube filling and sealing machine
The principle and characteristics of the filling and sealing machine, the filling and sealing machine can smoothly and accurately inject various pastes, pastes, viscous fluids and other materials into the hose, and complete hot air heating, sealing and batch number, production date wait. in the tube.
Check items of filling and sealing machine:
1. Before going to work every day, observe the water filter and oil mist device of the two-piece pneumatic assembly. If there is too much water, it should be removed in time, and if the oil level is not enough, it should be filled in time.
2. During the production process, it is necessary to regularly check whether the rotation and lifting of mechanical parts are normal, whether there is any abnormality, and whether the screws are loose;
3. The material contact part is made of 316 l stainless steel, which is clean and hygienic and fully meets the requirements of GMP.
4. The machine speed can be controlled and adjusted by frequency converter.
5. Do a good job of cleaning and sanitation, keep the surface of the machine clean, regularly remove the accumulated material on the scale body, and pay attention to keeping the inside of the electric control cabinet clean.
Inspection security points for cosmetic tube filling and sealing machine
6. Frequently check the grounding wire of the equipment and whether the contact requirements are reliable; clean the weighing platform frequently; check whether the pneumatic pipeline is leaking or the air pipe is broken.
7. Change the lubricating oil (grease) of the geared motor every year, check the tightness of the chain, and adjust the tension in time.
8. Drain the material in the pipe if it will not be used for a long time.
9. The sensor is a device with high precision, high density and high sensitivity. It is strictly forbidden to hit or overload. Contact is not allowed at work. Disassembly is not permitted unless repairs are required.
10. The height adjustment of the turntable is direct and convenient.
11. The filling volume of the hose can be adjusted by adjusting the hand wheel, which is convenient and quick.
12. Equipped with safety devices, open the door to stop, no pipeline, no filling, overload protection
Smart zhitongIt is a comprehensive and diversified filling and sealing machine manufacturers integrating design, production, sales, installation and service. It is committed to providing you with sincere and perfect pre-sales and after-sales services to benefit the field of chemical equipment
@carlos
Wechat WhatsApp +86 158 00 211 936
Website:https://www.cosmeticagitator.com/tubes-filling-machine/
Post time: Mar-09-2023
