Brief introduction of Tube Fill Machine

Tube Fill Machine is the equipment used for the tube packaging of cream cosmetics. The tube sealing machine is an equipment that has related requirements for precision. Therefore, in order to ensure the stable operation of the equipment in the future, learn the operating procedures of the filling and sealing machine. It is very necessary, let's learn the correct way to open the filling and sealing machine together!

 Correct operating procedures for Tube Fill Machine

1. Check Tube Fill Machine whether all components are intact and firm, whether the power supply voltage is normal, and whether the gas circuit is normal.

2. Check whether the sensors such as pipe seat chain, cup seat, cam, switch and color mark are in good condition and reliable.

3. Check Tube Fill Machine whether the connection and lubrication of each mechanical part are in good condition.

4. Check Ointment Tube Filler whether the tube loading station, tube crimping station, light alignment station, filling station, and sealing station are coordinated.

5. Clear tools and other items around the equipment.

6. Check Ointment Tube Filler whether all parts of the feeding unit are intact and firm.

7. Check whether the control switch is in the original position, and turn the machine with the hand wheel to determine whether there is any fault.

8. After confirming Ointment Tube Filler that the previous process is normal, turn on the power supply and the air valve, jog the machine for trial operation, first run at low speed, and gradually increase to normal speed after it is normal.

9. The upper pipe station adjusts the speed of the upper pipe motor to match the speed of the electric rod puller with the speed of the machine to maintain automatic pipe drop operation. 

10. The tube pressing station drives the pressure head to run at the same time through the up and down reciprocating movement of the cam linkage mechanism, and presses the tube to the correct position.

11. Use the hand wheel to move the car to the light position, turn the light cam to make the light cam close to the switch, and make the light beam of the photoelectric switch irradiate the center of the color mark, with a distance of 5-10 mm.

12. The filling station of Ointment Tube Filler is that when the hose is lifted up at the light-facing station, the probe tube proximity switch on the top of the pipe jacking up the cone ends the signal through the PLC and then through the solenoid valve to make it work, and it is 20MM away from the end of the hose. When the filling injection paste is over.

13. To adjust the filling volume of Ointment Tube Filler loosen the nuts first, then turn the respective screws and move the position of the stroke arm slider, increase outwards, otherwise adjust inwards, and finally lock the nuts.

14. The sealing station of auto tube filler adjusts the upper and lower positions of the sealing knife holder according to the needs of the pipe, and the gap between the sealing knives is about 0.2MM.
15. Turn on the power and air source, start the automatic operation system, and the filling and sealing machine enters automatic operation.

16 Auto tube filler is strictly forbidden for non-maintenance operators to adjust the setting parameters arbitrarily. If the setting is incorrect, the unit may not work normally, and may cause damage to the unit in severe cases. If it is necessary to adjust during the application process, please do it when the unit stops running.

17. Auto tube filler is strictly forbidden to adjust the unit when the unit is running

18. Stop pressing the "Stop" button, and then turn off the power switch and air source switch.

19. Thoroughly clean the feeding unit and auto tube filler unit.

20. Keep records of equipment operation status and routine maintenance.

Smart zhitong is a comprehensive and auto tube filler and equipment enterprise integrating design, production, sales, installation and service. It is committed to providing you with sincere and perfect pre-sales and after-sales services, benefiting the field of cosmetic equipment