What precautions should be taken during the operation of tube filling and sealing machine

tube filling and sealing machine definition

The tube sealing machine is to use heating technology and principle or ultrasonic heating to heat the sealing surface of plastic hose or composite pipe, and quickly inject the material from the tail of the pipe into the hose, soften and fuse the two sides of the hose tail under high pressure. At the same time, due to the use of heating technology and principles or ultrasonic heating, some disadvantages of poor sealing due to foreign matter on the tube wall are avoided, and the sealing is beautiful and beautiful.

precautions should be taken tube filling and sealing machine during running

1. Various protections of  tube filling and sealing machine should not be removed, or prohibited to use, so as not to damage the machine and staff.

2. To modify the parameter settings in the factory to prevent unstable or faulty machines, we need to change the parameters when you respond to the original record set command parameters.

3. Read this manual carefully after the hose filling and sealing machine, the filling and sealing machine and the factory are trained by qualified professionals, operators can operate this machine, non-professionals must not operate this machine.

4. Hose filling, sealing all doors and windows running, causing injury, helping to avoid contact with people

5. Clean soft cloth for soft hose filling and sealing machine and control sensor lens to avoid damage.

6. Disassemble and assemble the parts without stopping, cut off the power supply, gas, water fitting and slightly, gently, remove the parts so as not to damage the parts.

7. Use your hands to click on the touch screen need to be gentle, soft tube filling and sealing machine gets tired or hard objects, not fingers snap off, so as not to damage the touch screen.

8, debugging, Windows can disable security watch, the original state, but it is a familiar professional operation.

9 The tail tube is filled and sealed with the equipment required for the heating pipe of the tail machine, as well as the main engine and the cooling water start or the hot air heater carnival node. It is suggested that the cooling pipe damage caused by the fusion of the working disk tube cup and the last connection of the heater; near Hou, The blower delays the actual heater temperature and stays up to 60 ℃. The stone air supply stops the machine running, and the heating and cooling water continue to work. After the heater has cooled to 30 ℃, the main engine power and cooling water can be turned off to avoid damage. Component.

10. Broken glass and plexiglass observation window and do not use organic solvents or hard objects to clean the transparency to avoid damage to the test.

Smart zhitong is a comprehensive and tube filling and sealing machine machinery and equipment enterprise integrating design, production, sales, installation and service. It is committed to providing you with sincere and perfect pre-sales and after-sales services, benefiting the field of cosmetic equipment