aluminium tube filling and sealing machine Aluminum Tube Filler maintenance and maintenance procedures

 

The filling and sealing machine adopts closed and semi-closed filling paste and liquid. There is no leakage in the sealing. The filling weight and capacity are consistent. Filling, sealing and printing are completed at one time. Product packaging in chemical and other fields. Such as: filling and sealing of piyanping, ointment, hair dye, toothpaste, shoe polish, adhesive, AB glue, epoxy glue, neoprene and other materials.

It is an ideal, effective and economical filling equipment for pharmaceutical, daily chemical, fine chemical and other industries. When in use, it is necessary to ensure the integrity and excellent work of the equipment, and regular maintenance and maintenance of the filling and sealing machine is required.
1. All lubricating parts should be filled with enough lubricating agent to prevent mechanical wear.

2. During the working process, the operator should operate in a standard manner, and it is not allowed to touch the various parts of the machine tool when it is working, so as to prevent personal injury accidents. If any abnormal movement is found, it should be stopped in time to check until the cause is found out, and the machine can be restarted to work after the fault is eliminated.

3. It is necessary to add oil to the lubricator (including the feeding unit) before each start-up and production

4. Release the accumulated water of the pressure reducing valve (including the feeding unit) after shutting down after each production

5. Clean the inside and outside of the filling machine. It is strictly forbidden to wash with hot water higher than 45°C to avoid damage to the sealing ring.

6. After each production, clean the machine and turn off the main power switch or unplug the power plug.

7. Regularly check the sensor sensitivity

8. Fasten the connecting parts.

9. Check the connection between the electric control circuit and the sensors and tighten them.

10. Check and test whether the motor, heating system, PLC, and frequency converter are normal, and perform a cleaning test to see if each coefficient parameter is normal.

11. Check whether the pneumatic and transmission mechanism is good, and make adjustments and add lubricating oil.

12. Equipment maintenance items are handled by the operator and maintenance records are made
ZT has many years of experience in the development, design Automatic aluminium tube filling and sealing machine Aluminum Tube Filler
If you have concerns please contact