Lab Vacuum Mixer vacuum mixer laboratory

Brief Des:

0086 15800211936

Product Detail

Product Tags

The features of a vacuum mixer laboratory

Vacuum Chamber: It is the most prominent feature of a vacuum mixer laboratory. This chamber creates a negative pressure that removes air bubbles and eliminates voids, resulting in a more uniform and bubble-free mixture.
2. High Mixing Precision: vacuum mixer laboratory are designed to provide consistent and precise mixing of materials, with specific mixing parameters programmable to meet the needs of the user.
3. Versatility: vacuum mixer laboratory are versatile instruments that can be used for mixing a wide range of materials, from viscous liquids to powders.
4. Easy to Use Interface: A well-designed user interface makes operating the vacuum mixer laboratory easy and straightforward.

5. Safety Features: laboratory vacuum mixer is designed with several safety features to ensure operator safety, including emergency stop, over-voltage protection, and automatic power-off.
6. Efficient Mixing: vacuum mixer laboratory are designed to mix materials efficiently and effectively by minimizing the time and effort required to mix a given volume of material.
7. Compact Design: The compact design of vacuum mixers saves valuable laboratory space while still providing high-quality mixing.
8. Low Maintenance: Vacuum mixer laboratory instruments have a low maintenance requirement, minimizing downtime and keeping the laboratory running smoothly.

System introduction

Lab Vacuum Mixer is the latest model designed and developed by our technicians using the latest German technology according to the requirements of the Chinese market. Lab Vacuum Mixer is suitable for mixing, mixing, emulsification, dispersion and homogenization of low viscosity liquid in the laboratory. It can be widely used in cream, oil and water emulsification, polymerization reaction, nanomaterials dispersion and other occasions, as well as special workplaces required by vacuum or pressure experiments.

Lab Vacuum Mixer has the characteristics of simple structure, low volume, low noise, smooth operation, long service life, easy operation, easy cleaning, installation and disassembly, and convenient maintenance.

1、Main technical parameters

Stirring motor power: 80--150 W

Rated voltage: 220 V / 50 Hz

Speed range: 0-230 rpm

The viscosity of the applicable medium: 500 ~ 3000 mPas

Lift stroke: 250---350 mm

Minimum agitation amount: 200---1,000 ml

Minimum emulsification volume: 200---2,000 ml

Maximum workload: 10,000 ml

Maximum allowable operating temperature: 100℃

Allowable vacuum: -0.08MPa

Contact material material: SUS316L or borosilicate glass

The kettle lid lifting form: electric lifting

Reverting form: manual flip manually

2、Operation process of vacuum mixer laboratory

1. Before opening the box, check whether the packing list, qualification certificate and the attached accessories are complete, and whether the equipment is damaged during transportation.
2. vacuum mixer laboratory must be placed horizontally and strictly tilted, otherwise the equipment is prone to produce resonance or abnormal operation during the operation.
3. Take out the equipment out of the box and place it on the pre-arranged platform to prepare for the test machine. vacuum mixer laboratory has been adjusted and installed in the production plant, and needs to be learned to operate on site.
4. First release the clamp and the lid joint , and then press the rise button on the control panel on the electric control cabinet , the lid will rise, rise to the limit position will automatically stop
(2). At this time, press the drop button on the control panel, and the lid will drop at a uniform speed, so that the lid is close to the clamp ring , and then tighten the clamp
3. Now put the speed control knob of the mixing motor on the control panel in the "0" or off position, then plug the plug of the emulsification machine in the power supply, put the speed control knob of the emulsification motor in the "0" or "off" position, and the test preparation is finished.
4. When conducting the experiment, we should pay attention to whether the central position of the reactor and the mixing propeller deviate. Under normal circumstances, the company has corrected and fixed the central position of the reactor and the mixing propeller
Just to prevent the equipment in the process of transportation by the impact and other abnormal conditions. After the mixing propeller is placed in the reactor, the stirring motor is started at low speed (at the lowest speed of the motor), and the coordination position of the reaction kettle and the kettle lid is adjusted until the stirring propeller can operate flexibly in the reactor, and then the lock clamp is tightened.
For each experiment, ensure that the reactor is located on the kettle ring and is locked before the experiment.

3、pilot run for vacuum mixer laboratory

1. Before starting the machine, test the machine with clean water, pour the sailor in the measuring cylinder equipped with 2--5L water into the glass kettle, observe the central position, and tighten the lock clip.
2. Adjust the speed control knob to the lowest speed position, open the motor power button, and pay attention to the rotation of the mixing propeller in the reaction kettle. If there is interference between the rotation process of the mixing propeller and the inner wall of the reaction kettle, it is necessary to adjust the central position of the reaction kettle and the mixing propeller again until the mixing propeller rotates flexibly.
3.Adjust the motor speed, make the motor speed from slow to fast, and start the random configuration of the emulsification machine, make it work at the same time, observe the mixing of the liquid level in the reaction kettle.
4. In the process of operation, if there is a serious swing around the mixing propeller, the sound of the equipment is abnormal, or the vibration of the whole machine is serious, it must stop for inspection, and then to continue to run after the fault is removed.(If the fault cannot be eliminated, please contact the after-sales service department of the company in time)
5. When the stirring motor rotates at low speed, the slight friction sound will be issued between the scraping wall plate and the reaction kettle, which is a normal phenomenon. The equipment is not operating abnormally.
6. After the work of vacuum mixer laboratory, if it is necessary to release the material in the kettle, the bottom of the kettle of the equipment with the discharge valve, then hit the open material valve directly.
7.During the trial run, if the vacuum mixer laboratory is running normally, it can be formally put into use in the future experiments.