1. injin cika kwalbar turare Dubawa
12-head linear high-gudun turare mai cike da kayan aiki mai inganci kuma daidaitaccen kayan aiki, wanda ya dace da cika ruwa kamar turare, mai mahimmanci, ruwan shafa, da sauransu. a lokaci guda, yana haɓaka haɓakar samar da kayayyaki sosai.
2. Abubuwan fasaha don injin cika turare
1. Cikakken cikawa: 12 masu cikawa suna aiki a lokaci guda, saurin cikawa yana da sauri, kuma ya dace da samar da manyan ayyuka.
2. Daidaitaccen ma'auni: An ƙaddamar da tsarin ƙididdiga na ci gaba don tabbatar da cewa adadin cika kowane kwalban daidai ne.
3. Ƙaƙƙarfan aiki: Kayan aiki yana da tsayayyen tsari, aiki mai tsayi, ƙananan ƙararrawa, da sauƙi mai sauƙi.
4. Faɗin aikace-aikace: Ya dace da kwalabe na ƙayyadaddun bayanai da kayan aiki daban-daban, kamar kwalabe na gilashi, kwalabe na filastik, da dai sauransu.
5. Babban digiri na aiki da kai: Yana iya gane ayyukan haɗin gwiwa kamar ciyarwar kwalba ta atomatik, cikawa ta atomatik, da kuma rufewa ta atomatik, rage sa hannun hannu, da inganta ingantaccen samarwa.
3. Babban sigogi na injin cika turare ta atomatik
1. Yawan cika kawunan: 12 shugabannin
2. Ciko kewayon: Ya dogara da takamaiman samfurin da daidaitawa, gabaɗaya ya dace da cika ruwa daga 5ml zuwa 500ml.
3. Cika daidaito: Yawancin lokaci zai iya isa ± 0.5% zuwa ± 2% cika daidaito don tabbatar da ingancin samfurin.
4. Wutar lantarki: Yawancin lokaci 220V
Yanayin aiki, asali na asali da sigogi na fasaha
1. Yanayin aiki:
Jikin kwalban yana daidaitawa ta hanyar ƙira, kuma ana amfani da madaidaiciyar hanyar motsi don jigilar shi zuwa kowane ƙayyadadden matsayi na aiki (ɗaukar kwalba ta atomatik-aiki ta atomatik cika-manual famfo kai lodi-atomatik tying-manipulator isar da kwalban).
2. The aiki sashi na wannan inji ne mutum-injin dubawa (sanye take da Siemens tabawa)
II Tsari na asali:
1. Duk inji an yi shi da bakin karfe -------------SU304
2.The abu lamba part aka yi da bakin karfe ----------- SU304
3. The abu na sauran sassa da aka yi da wuya anodized aluminum
4. Sashin tuntuɓar kayan (sai dai bakin karfe) ---PP
5/Cika Silinda ------Yadek
6. Motar watsawa --JSCC
7.PLC tsarin sarrafawa --- Japan Mitsubishi
8/Abubuwan da ke gano wutar lantarki --Autonics
9/Na'urorin lantarki marasa ƙarfi -----Japan Omron, Delixi, da dai sauransu.
III Siffofin fasaha:
1 / Ƙarfin wutar lantarki: 220V
2/Matsi na iska: 0.5-0.8Mpa
3/Ikon: 3KW
4/Yawan iskar gas: 60L/min
5/Cikin girma: 10-150ML
6/Cikin daidaito: 0.5%
7 / Saurin ciko: 80-120 kwalban / min
Tsarin asali da sigogin fasaha na dukkan na'ura
1/An fitar da shugaban da aka cika da injina don cikawa, kuma ana iya daidaita adadin
2/Yana daukar tsotson kai.
3.Filling ya kasu kashi-kashi mai yawa.
4. The gudun dukan samar line kai 80-120 kwalabe / minti (shan 50ML ruwa a matsayin misali)
5. The isar kwalban ne mold gyarawa workpiece, da kuma mota ne Jamus JSCC iri
6. Duk injin ɗin ya kasu kashi 4: (na'urar watsawa ta rukuni-rukuni biyu, na'urar watsa shirye-shiryen zobe sarkar, injin cikawa, na'urar rufewa ta atomatik)
Kuna neman injin tura turare?don Allah danna nan
Lokacin aikawa: Oktoba-24-2024
