Gudun aikiofInjin Cikon Haƙori

Injin Cika Haƙori PLC ne ke sarrafa shi kuma ana sarrafa shi ta allon taɓawa. A lokaci guda, yana kammala ayyukan ciyarwar bututu, danna bututu, daidaita siginar siginar, cikawa, rufewa, bugu ta atomatik na lambobi, da fitarwa ta atomatik. Dukkanin tsarin yana sarrafa kansa sosai. Cikakken tsarin aiki na atomatik daidai ne, lafiyayye, kimiyya da abin dogaro.

Cikakken atomatik mai launi biyu da launuka masu yawaInjin Cikon Haƙorikayan aiki ne wanda kamfaninmu ya haɓaka bisa ga buƙatar kasuwa. Injin yana ɗaukar allon taɓawa ta Delta da tsarin kula da PLC. Injin Cika Haƙori yana da sauƙin aiki, barga a cikin aiki, mai ƙarfi a cikin haɓakawa, mai sauƙin daidaitawa da tarwatsa Sauƙi; an rufe sashin watsawa a ƙasa da dandamali, wanda ke da aminci, abin dogaro kuma mara gurɓatacce; an shigar da ɓangaren cikawa da hatimi a sama da dandamali a cikin rufaffiyar rufaffiyar ɓoyayyen firam ɗin da ba a iya gani ba, mai sauƙin lura, mai sauƙin aiki, da sauƙin kulawa; da photoelectric benchmarking workstation, tare da High-madaidaicin bincike, mataki Motors da sauran iko tiyo alamu suna located a daidai matsayi; bututun mai yana ɗaukar zoben rufewa da aka shigo da su don hana cikowa; Wurin aiki yana buga lambar haruffa ta atomatik akan matsayin da tsarin ke buƙata; babu bututu, babu cikawa, aikin kariya mai yawa; kirgawa da kashewa. A kan wannan na'ura, ana iya amfani da manipulator na filastik don yanke wutsiyar bututun zuwa kusurwar dama ko kusurwa mai zagaye don zaɓi, kuma yana iya samun nau'o'in hanyoyin rufewa iri-iri kamar ninki biyu, ninki uku, sirdi. - nadawa, da sauransu na bututun ƙarfe ko bututun aluminum. Ana iya amfani da na'ura mai cike da haƙori a matsayin na'ura mai zaman kanta, ko kuma za'a iya haɗa shi tare da na'ura mai kwakwalwa ta atomatik da cikakken fim ɗin ajiyar zafin jiki na atomatik don samar da layin haɗin kai don samar da haɗin gwiwa.

Matsakaicin Na'urar Cika Haƙori: An yi amfani da shi sosai a cikin man goge baki, man shafawa, kayan kwalliya, adhesives, rini na gashi, fenti na fasaha, goge takalma da sauran masana'antu don cika bututu da rufe ruwa zuwa kayan ruwa mai ƙarfi; da cikakken lambar batch, kwanan watan samarwa da sauransu.

Ma'aunin Fasaha naInjin Ciko Haƙori

Ma'aunin Fasaha

Tube diamita: 10--40mm

Abubuwan da ake amfani da su: bututun filastik, bututu masu haɗaka / bututun ƙarfe, bututun aluminum

Girman cikawa: 5--300ml daidaitacce

Saurin samarwa: 80-130 guda / minti

Daidaiton aunawa: ± 1%

Wutar lantarki: 10kw

Wutar lantarki: 380V/220V 50Hz

Yawan amfani da iska: 60m3/h

Amfanin ruwa: 6l/min

Matsin iska: 0.6Mpa

Nauyin injin: 1350Kg

Girman kayan aiki: 2160×1200×2200mm

Injin Cika Haƙori Babban aikin injin

1. DaidaitoMadaidaicin jagorar lambar launi: ± 1.5mm

2. Fdaidaitattun ƙididdiga: ± 1%

3. Hcin abincihanyoyin: nau'in iska mai zafi.

4. Ssyncronous bel na tube-sarkar watsa, high daidaito.

5. Skwaryaaluminumkofintare dadaidai gwargwado.

6. Encoder yana sarrafa daidaito, daidai kuma daidai.

7. Rolling ko layin layi na sassan masu gudana na dangi.

8.PLC iko, ana sarrafa saurin ta babban motar.

9.7 inch allon taɓawa mai launi tare da ƙirar ɗan adam-na'ura

10. Tya tuntuɓar kayan abu tare da manna yana ɗaukar 316L bakin karfe.

Smart zhitong cikakke ne kumaInjin Cikon Haƙorida kayan aiki na kayan aiki da ke haɗa ƙira, samarwa, tallace-tallace, shigarwa da sabis. Ya himmatu wajen samar muku da sahihanci da cikakkiyar sabis na tallace-tallace da bayan-tallace-tallace, cin gajiyar fannin kayan kwalliya.